Central Singapore · Quoted after inspection

Parquet Sanding & Varnishing in Central Singapore

Full parquet polishing takes the floor back to bare timber. We sand off the old varnish, scratches and grey patches, fill gaps, then lay a sealer and two coats of polyurethane varnish. The result looks like a new floor, at a fraction of the cost of replacing it.

WhatsApp photos for a quote Call +65 9450 9801

Sealer applied over sanded parquet, showing wet and dry areas — Sealer: coated vs sanded

What's included

Free site check or photo quote
Re-glue loose or hollow pieces before sanding
3-stage sanding (coarse, medium, fine) with dust extraction
Edge and corner sanding along skirting and door frames
Gap filling with timber filler matched to your floor
Sealer coat plus 2 coats of polyurethane varnish
Light sand between coats for a smooth finish
Clean-up and aftercare advice on WhatsApp

Signs you need this

Grey or black patches where the varnish has worn through
Scratches and dents you can feel
Floor looks dull even after mopping
Water marks near windows, doors or the aircon
Moving into a resale flat with old parquet

Full Sanding & Varnishing prices

Service	Price (SGD)
Full sanding + sealer + 2 coats varnish	Quoted after inspection
Polishing only (buff + 1 fresh coat), single bedroom	From $350*
Whole HDB flat (4-room), polishing only	From $1,300*

*Indicative starting rates. Final price always depends on floor condition, area, repairs required and finish selected. Polishing means machine buffing of the existing surface plus one fresh coat of varnish. Full sanding, repairs and staircases are quoted after inspection. The price we confirm on WhatsApp is the price you pay.

Timeline

Wait to start: Usually 3 to 7 days after you confirm
Time on site: 1 bedroom: 1 day. 3 bedrooms: 2 days. Whole flat or house: 3 to 4 days, including coats

How a job works

WhatsApp us 3 or 4 photos of the floor, including a close-up and any damaged spots, plus your block or condo and the rooms you want done.
Get a price. We reply with an estimate the same day, or visit within 1 to 3 days to measure and tap-test.
Book a date. Jobs usually start 3 to 7 days after you confirm.
We sand, fill and varnish, with dust extraction and doors taped off.
Inspect together and pay by PayNow or bank transfer once you're happy.

Before we arrive

Clear small items, rugs and anything fragile from the rooms.
Tell us if you need help moving beds or wardrobes.
Let us know about any leaks, termite history or areas that sound hollow.
Check your condo's renovation rules: permit, lift booking and working hours.
Keep pets and children out of the rooms during sanding and drying.

Aftercare

Sweep or vacuum daily, wipe with a damp (not wet) mop, and put felt pads under chair legs. Most floors need a light recoat every 3 to 5 years and a full sanding only when the varnish has worn through.

Maintenance schedule →

Central Singapore focus22 central areas, short travel, more available dates
Price before workConfirmed on WhatsApp
All floor typesSolid, engineered, herringbone, mosaic
Dust-controlled sandingExtractors and taped-off doors

Full Sanding & Varnishing by area

Find your condo →

Other services

Full Sanding & Varnishing photos from recent jobs

Real photos from our recent parquet jobs.

Technicians sanding finger parquet with a drum sander — Sanding in progress

Floor sander in a bedroom with finger parquet — Sander set up in the bedroom

Sealer being applied over freshly sanded parquet — Sealer coat going on

First coat of varnish being applied over freshly sanded parquet — First coat going on: sanded vs coated

More from this job

Real photos from our recent parquet jobs.

Close-up of freshly sanded oak parquet — Freshly sanded: old varnish fully removed

Finger parquet room after sanding and sealing — Room after sanding and sealing

Large bedroom with sanded finger parquet — Large bedroom, sanded

Finished finger parquet bedroom beside the window — Even colour to the window

Frequently asked questions

How much does full sanding cost?

Full sanding is quoted after we inspect the floor, because it depends on condition, area and repairs. If your floor only needs a polish (buffing plus a fresh coat), that starts from $350 for a single bedroom.

How long does it take?

A single bedroom takes about a day. Three bedrooms usually take 2 days. You can walk on the floor in socks about 12 to 24 hours after the last coat.

Is sanding very dusty?

Our sanders are connected to dust extractors, and we vacuum between passes. Some fine dust is normal, so we tape off doors and cover built-in furniture.

Can you do only one room?

Yes. Polishing a single bedroom starts from $350.

Oil-based or water-based varnish?

Oil-based PU gives a warm amber tone and is very hard-wearing. Water-based PU stays clearer, smells much less and dries faster. See our guide comparing the two.

Want your parquet looking new again?

Send 3 or 4 photos of your floor on WhatsApp and get a price, usually the same day.

WhatsApp us Call +65 9450 9801